(HV is 129-512 EU/packet)
(MV is 33-128 EU/packet)
(LV is 12-32 EU/packet)
MV current must be wired into the Medium Voltage face (the 3-dotted one), while LV current can be wired into any other face. By default, the Transformer outputs LV current. A Redstone signal must be applied to it in order to make it reverse flow, thereby emitting MV current from the Medium Voltage face (the 3-dotted one).
|Raw Materials Needed (1 Lv Transformer)|
|4 (6 to complete crafting)||Copper|
When using any Transformer, remember that the 3-dotted side means Higher Voltage and the 1-dotted sides mean lower voltage. You can change the direction the 3-dotted side is facing by right-clicking a 1-dotted face with a Wrench or Prototype OmniWrench .
Converting to LV:
In order to convert from MV to LV, you must point the cable carrying MV from an MV Transformer or MFE Unit to the 3-dotted side and then link a cable to one of the sides with a single dot. Then that cable will be carrying LV that you can safely link to machines or store in a BatBox.
Converting to MV:
In order to convert from LV to MV, point the cable carrying LV from a BatBox or a Generator to one of the one-dotted sides and then link a cable that can carry MV from the 3-dotted side. Don't forget to apply Redstone to the LV Transformer.
|Input||128 or 32|
|Output||32 or 128|